Address

Pune-411038, India

Phone No

+91 9699998606

Mail

info@xproventures.com

Group of Fastners

STUDS BOLTS / FULL THREAD STUDS

Using IS-2062 Grade A, En-8, En-19, SS-410, SS-304, SS-316 or any other material as per the specification of the customer.
As per IS-1367 Class 5.6, Class 8.8, Class 10.9, Class12.9, ASTM A193 B7, ASTM A193 B8, B8M, B16, ASTM A563 L7, L7M.
Surface Treatment: Blackodised, Phosphated, Zinc Plated with yellow, blue, olive green passivation.
Threading sizes from M6 to M100 ISO Metric 6g as per IS-4218 or equivalent in BSW / UNC, of following types

  • Full Thread Studs as per DIN 975.
  • Rods with Threading on one side as per DIN 524.
  • Studs with Threading on two sides as per DIN 939, DIN 940, IS 1862 Type A, B & C.
  • Tip-Welding Studs.
  • Tie Rod Studs for Plate Type Heat Exchangers.
  • Square / ACME Thread Studs (Lead Screws).
  • Other Studs as per your specific requirement and drawing.

HEX HEAD BOLTS

Using IS-2062 Grade A, En-8, En-19, SS-410, SS-304, SS-316 or any other material as per customer specification.
As per IS-1367 Class 5.6, Class 8.8, Class 10.9, ASTM A 193 B7, B8, B8M, A2-70, A4-70, A4-80
Surface Treatment : Blackodised, Phosphated, Zinc Plated with yellow, blue, olive green passivation.
Threading Sizes M6 to M100 ISO, Metric 6g, as per IS-4218 or equivalent in BSW / UNC of following types

  • Full Thread Hex Bolts.
  • Half Thread Hex Bolts.
  • Hex Bolts for Steel StREPLctures as per IS-6639.
  • Special Hex Bolts as per DIN 561, DIN 933.
  • Other Hex Bolts as per your specific requirement and drawing.

COUNTER SUNK SCREWS / SLOTTED / ALLEN

Using IS-2062 Grade A, En-8, En-19, SS-410, SS-304, SS-316 or any other material as per customer’s specification.
As per Class 4.6, Class 5.6, Class 8.8, Class 10.9, A2-70, A4-70, A4-80.
Surface Treatment: Blackodised, Phosphated, Zinc Plated with yellow, blue, olive green passivation
Threading Sizes M6 to M64 ISO, Metric 6g, as per IS-4218 or equivalent in BSW / UNC of following types

  • Dimensions as per ISO-898/1.

EYE BOLTS / LIFTING EYE BOLTS

Using IS-2062 Grade A, En-8, En-19, SS-410, SS-304, SS-316 or any other material as per customer’s specification.
As per IS-1367 Class 4.6, Class 8.8, Class 10.9, A2-70, A4-70, A4-80
Surface Treatment : Blackodised, Phosphated, Zinc Plated with yellow, blue, olive green passivation.
Threading Sizes M12 to M64 ISO, Metric 6g, as per IS-4218 or equivalent in BSW / UNC of following types

  • Manufacturing as per IS-4190 / DIN 580.

U-CLAMPS

Using IS-2062 Grade A, En-8, En-19, SS-410, SS-304, SS-316 or any other material as per customer’s specification.
As per IS-1367 Class 4.6, Class 8.8, Class 10.9, A2-70, A4-70, A4-80
Surface Treatment : Blackodised, Phosphated, Zinc Plated with yellow, blue, olive green passivation.
Threading Sizes M6 to M24 ISO, Metric 6g, as per IS-4218 or equivalent in BSW / UNC of following types

  • Suitable for 15NB (1/2“) up to 800 NB (12“) Pipes.
  • Suitable for 12.5 (1/2“) up to 800 (12“) OD Pipes.
  • Available in Rod Sizes 6mm to 16mm with 2 Nuts & 2 Washers.
  • Available in Flat (Patti) for above sizes.

NUTS

Using IS-2062 Grade A, En-8, En-19, SS-410, SS-304, SS-316 or any other material as per customer’s requirement.
As per IS-1367 Class 4, Class 8, Class 10, A2-70, A4-70, A4-80, SA194 Gr 2H/B8A
Surface Treatment : Blackodised, Phosphated, Zinc Plated with yellow, blue, olive green passivation.
Threading Sizes M6 to M100 ISO, Metric 6g, as per IS-4218 or equivalent in BSW / UNC of following types

  • Standard Nuts as per IS-1364, ISO 4032, IS 6623.
  • Lock Nuts
  • Nylock Nuts
  • Heavy Nuts
  • Long / Double Nuts
  • Castle Nuts as per IS-2232
  • Round Nuts
  • Any other nut as per customer’s drawing & requirement

WASHERS

Using IS-2016 Grade A, En-8, En-19, SS-410, SS-304, SS-316 or any other material as per customer’s requirement.
Surface Treatment : Blackodised, Phosphated, Zinc Plated with yellow, blue, olive green passivation.
Threading Sizes M6 to M100 ISO, Metric 6g, as per IS-4218 or equivalent in BSW / UNC of following types

  • As per IS-2016 Type A Punched Washers for Hex Bolts & Screws.
  • As per IS 2016 Type B Punched Washers for Round & Cheese Head Screws.
  • Any other Washers as per customer’s requirement.

We are offering services to deliver
product as per customer requirements.

Sales

For any sales related queries-write to us at.

Copyright © 2023 Xpro Ventures

Privacy Policy  Terms & Services

Scroll to Top